WOLF Fastener Info

RECOMMENDED FASTENERS
Wolf Serenity Decking is designed for durability and correct fasteners must be used to ensure the quality of the installation. High quality fasteners that meet the following requirements are recommended:

• Stainless Steel.
• #10 Screw Size Minimum.
• 2 ¼” Length Minimum.
• Coastal applications near salt water require a 316 Stainless Steel screw or better.
• Cortex®, CAMO® Stainless Steel and HIDfast™ hidden fastening systems work well with Wolf Serenity Deck.
• For CAMO®, HIDfast™ and other side mount installations, use Cortex face screws or other positive fastening system within ½” of the end of each board. For any other fastener systems contact Wolf customer service or the fastener manufacturer for compatibility.

NOTE

• When installing Wolf Serenity Decking with hidden fasteners, always use a sacrificial board against the side of the deck board. Never strike Wolf Serenity Deck board directly with hammer or rubber mallet.
• On rooftop decks and on-grade applications, every consideration should be given to providing maximized ventilation. Soffit vents and venting holes through sleepers are recommended. If using sleepers, ensure the decking is a minimum of 3-1/2” from grade or roof surface.
• Dock and pier installations may have special fastening specifications as required by building codes. Check with local authorities prior to installation.
• For best results, pre-drill holes when installing decking at 40°F or below.
• Cutting a continuous groove in the side of the board will void the warranty and is not recommended.